Home > ABB Flow Meter >

ABB Flow Measurement Products Dual Chamber Orifice Fitting FPD212

Product Categories

Eco-Tech Suzhou Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

ABB Flow Measurement Products Dual Chamber Orifice Fitting FPD212

Brand Name : ABB

Model Number : Dual chamber orifice fitting FPD212

Accuracy : High

Communication Protocol : HART, PROFIBUS, FOUNDATION Fieldbus

Fluid : Gas, Liquid

Installation Type : In-line, Insertion

Material : Stainless Steel, Alloy Steel, Titanium

Measuring Principle : Differential Pressure

Output Signal : 4-20mA

Pressure Range : 0-100Bar

Process Connection : Flange, Thread, Sanitary

Product Name : ABB Flow Measurement Products

Product Type : Flow Measurement

Range : Wide

Temperature Range : 0-150℃

Warranty : 1 Years

Contact Now

Dual chamber orifice fitting FPD212

FPD212 is dual-chamber orifice fitting, suitable for fiscal (custody transfer) applications. Subject to customer’s own protocols, these fittings may enable orifice plates to be inspected and / or replaced without removing the fitting itself from the pipeline.

Overview

The FPD212 dual-chamber orifice is a proven system for safely and quickly inspecting and changing orifice plates. Orifice meters used in the Oil & Gas industry are typically of either the single-chamber or dual-chamber design.

Single-chamber orifice fittings have an orifice plate that can be replaced without removing the fitting from the pipeline. However, before the plate can be withdrawn, the flow must be stopped and the pipeline vented.

Dual chamber orifice fittings such as the FPD212 have an extra chamber into which the orifice plate is first withdrawn; this chamber is then isolated from the pipeline. This means that the flow in the pipeline does not necessarily have to be stopped to enable removal and refitting of the orifice plate and, although the second chamber must be vented, there is no requirement to vent the pipeline section.

Data

The FPD212 dual chamber fitting can – subject to the operator’s own protocols – sometimes allow the orifice plate to be inspected or changed whilst the line is still pressurised.

However a safer and more industry-accepted meter to use in those situations is the FPD220 Double Block & Bleed Dual chamber meter

The features of the FPD212 are :

High-pressure solution for up to ANSI 2500 rating
Rated to 10,000 psi (698 bar)
Maintenance can be performed at any time
No need to wait for annual shutdown

ABB Flow Measurement Products Dual Chamber Orifice Fitting FPD212

Product Tags: